Swix Base-Side Dual Edger Ski Snowboard Tool with Metal File 9

Side and base edge bevel multi tool that includes a 80-mm file. This one tool is all you need to sharpen and bevel your edges. NOTE: 80 mm is the maximum length file or stone that will fit into this tool. 70- or 80-mm stones are recommended. Dial a precise side angle from 0 degree to 5 degrees and 0.5 to 1.0 degree on the base.9 angles total. It is recommended that you set the edge bevels with the file and then replace the file with 70- or 80-mm diamond stones to maintain the sharpness; if you always use the metal file, you will wear away the edge. Bonus Benefit: If you don't know what base and side angles your ski/board are set to, before you start, mark the metal edge with a sharpie, start the tool at the lowest angle and see if it removes the marking on your edge. Raise the angle step-wise and repeat until it removes the mark. That is your angle! Record the base/side angles for future reference. Instructions included.